In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are level and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask because your pet security, you’ll have to do some sanding to make certain it dogsrecommend.com/dog-mask/ is secure on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.